Data Sheet
CE Certified
This product conforms with essential health and safety requirements as set out in European Directives.
The PPE Online Shop is now Ruffles Workwear
The PPE Online Shop is now Ruffles Workwear
Checking quantity prices...
VAT free
In order to comply with EN ISO 11611 all external pockets must be flapped, except for side pockets below the waist which do not extend more than ten degrees forward of the seam.
A single rule pocket with an opening not greater than 75mm is permitted behind the side seam on one or both legs.
To meet EN ISO 11611 tensile strength must be at least 400N and tear strength must be at least 15N for class 1 and 20N for class 2.
For example:
Portwest's winning FR50 style has a tensile strength value of at least 500N and tear strength of at least 25N after 50 washes.
This international standard specifies minimum basic safety requirements and test methods for protective clothing for use in welding and allied processes (excluding hand protection). There are two classes with specific performance requirements.
Class 1 is protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat.
Class 2 is protection against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.
The EN ISO 11611: standard has the following parameters:
EN ISO 11612 is the standard for protective clothing which protects against heat and flame. Users for these garments include those who work in oil & gas, welding & allied processes, mining, petroleum and many other industries.
There are a host of specific tests conducted as part of EN ISO 11612, including tests for: Flame Spread, Tensile Strength, Tear Resistance, and Heat Resistance.
Flame Spread Test:
A flame is held against the fabric for ten seconds. After it is removed the fabric should not continue to burn. There should be no hole formation, melting or molten debris.
Tensile Strength Test:
The fabric must be able to withstand a minimum force of 300 newtons while being stretched or grabbed.
Tear Resistance Test:
The fabric must be able to withstand a minimum force of 10 newtons before it will tear.
Heat Resistance Test:
The fabric is placed in an oven at 180oC and must not ignite melt or shrink within the first 5 minutes in order to comply with the standard.
This product conforms with essential health and safety requirements as set out in European Directives.
This symbol indicates UKCA marking in progress at time of print. All products placed on the UK market from January 2023 must be UKCA marked.
This product is CE marked as a Category 3 item for complex design.
40+ UPF rated fabric to block 98% of UV rays.
This garment features 4 pockets.
This garment has a radio loop for easy attachment of a radio.
An optional test for safety helmets, it indicates the resistance to molten metals and hot solids projection.
Portwest has been independently rated by Ecovadis for its environmental, social, and ethical performance and achieved a gold rating, meaning they are in the top 5% of globally rated companies.
The pillars taken into consideration include the environment, labour practices and human rights, ethics, and sustainable procurement.
For workers constantly facing high heat environments including welders and industrial workers, the Portwest CE Safe-Welder Coverall in Orange stands as a beacon of safety, functionality, and value. This garment, beyond just protective features, offers an enhanced fit thanks to its side elastic, designed to ensure comfort through long working hours. It’s not just about safety; it’s about working with efficiency and convenience, with easy access to the coverall facilitated by a concealed stud front.
Key Features:
Compliance with Safety Standards:
The Portwest CE Safe-Welder Coverall in Orange is the quintessential protective garment for welders and other industrial workers, marrying certified safety features with practical design elements to facilitate a productive and safe work environment. Let it be your shield in the face of workplace hazards, providing not just protection but also a comfort-oriented design.
For workers constantly facing high heat environments including welders and industrial workers, the Portwest CE Safe-Welder Coverall in Orange stands as a beacon of safety, functionality, and value. This garment, beyond just protective features, offers an enhanced fit thanks to its side elastic, designed to ensure comfort through long working hours. It’s not just about safety; it’s about working with efficiency and convenience, with easy access to the coverall facilitated by a concealed stud front.
Key Features:
Compliance with Safety Standards:
The Portwest CE Safe-Welder Coverall in Orange is the quintessential protective garment for welders and other industrial workers, marrying certified safety features with practical design elements to facilitate a productive and safe work environment. Let it be your shield in the face of workplace hazards, providing not just protection but also a comfort-oriented design.
Specifications are subject to change - See Terms & Conditions for more info
This item can be ironed on a medium temperature setting of up to 150°C
This item can only be washed a maximum of 50 times