In order to comply with EN ISO 11611 all external pockets must be flapped, except for side pockets below the waist which do not extend more than ten degrees forward of the seam.
A single rule pocket with an opening not greater than 75mm is permitted behind the side seam on one or both legs.
To meet EN ISO 11611 tensile strength must be at least 400N and tear strength must be at least 15N for class 1 and 20N for class 2.
For example:
Portwest's winning FR50 style has a tensile strength value of at least 500N and tear strength of at least 25N after 50 washes.
Reflective tape must be at least 50mm wide. Bands of reflective tape must be positioned at least 50mm apart.
Reflective tape must be positioned 50mm or more from the end of sleeve or leg.
Reflective tape must encircle torso and/or limbs to be included in the calculation of the necessary square area of reflective tape. A gap (for fastening system or seam) in the band of reflective tape must be 50mm or less. The total amount of such gaps in every band must not exceed 100mm around the torso and 50mm around the sleeves and legs.
Highest level of protection - required for any persons working on or near motorways, dual-carriage ways or airports. Must incorporate a minimum of 0.80m2 of background material and 0.20m2 of retroreflective materials. (4 metres of 5cm wide reflective tape)
Required for any persons working on or near A and B class roads, also for delivery drivers. Must incorporate a minimum of 0.50m2 of background material and 0.13m2 of retro-reflective material. (2.60 metres of 5cm wide reflective tape)
Minimum level of protection required for any persons working on a private road or to be used in conjunction with a higher classed garment. Must incorporate a minimum of 0.14m2 of background material and 0.10m2 of retroreflective material. (2 metres of 5cm wide reflective tape)
This international standard specifies minimum basic safety requirements and test methods for protective clothing for use in welding and allied processes (excluding hand protection). There are two classes with specific performance requirements.
Class 1 is protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat.
Class 2 is protection against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.
The EN ISO 11611: standard has the following parameters:
This European standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing.
The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges.
The requirements may not be sufficient in oxygen enriched flammable atmospheres.
This European Standard is not applicable for specifying protection against main voltages.
Test method for measurement of surface resistivity. Surface resistance measures the conductivity between two points on the surface of a fabric. The lower the resistance the higher the conductivity, resulting in charge going to earth.
Test method for measurement of the electrical resistance through a material (vertical resistance). This is the level of conductivity when measured through the depth of a fabric.
Test methods for measurement of charge decay. Charge decay measures how long it takes for an electric current to dissipate. The quicker it dissipates the higher the anti-static properties of the garment.
Please note the EN 1149-4 Garment Test is under development.
EN 1149-5 specifies the performance and design requirements to avoid static discharge for all electrostatic dissipative protective clothing as part of an entire earthed system, shoes, clothing & floor. The material meets the requirements.
EN ISO 11612 is the standard for protective clothing which protects against heat and flame. Users for these garments include those who work in oil & gas, welding & allied processes, mining, petroleum and many other industries.
There are a host of specific tests conducted as part of EN ISO 11612, including tests for: Flame Spread, Tensile Strength, Tear Resistance, and Heat Resistance.
Flame Spread Test:
A flame is held against the fabric for ten seconds. After it is removed the fabric should not continue to burn. There should be no hole formation, melting or molten debris.
Tensile Strength Test:
The fabric must be able to withstand a minimum force of 300 newtons while being stretched or grabbed.
Tear Resistance Test:
The fabric must be able to withstand a minimum force of 10 newtons before it will tear.
Heat Resistance Test:
The fabric is placed in an oven at 180oC and must not ignite melt or shrink within the first 5 minutes in order to comply with the standard.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Equip yourself with the ultimate in safety and visibility with the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy. Designed for the modern workforce, this coverall leverages flame-resistant fabric technology coupled with high-visibility and anti-static protection, providing a multifaceted shield in high-risk environments.
Key Features:
Certified Standards:
Step into the Portwest Hi-Vis Anti-Static Bizflame Pro Coverall in Yellow/Navy, a reliable ally in safeguarding yourself against a myriad of workplace hazards while ensuring visibility and static protection. Experience the robust construction and intelligent design that meets rigorous industry standards, offering peace of mind as you undertake your daily tasks.
Specifications are subject to change - See Terms & Conditions for more info
Portwest has been independently rated by Ecovadis for its environmental, social, and ethical performance and achieved a silver rating, meaning they are in the top 25% of globally rated companies.
The pillars taken into consideration include the environment, labour practices and human rights, ethics, and sustainable procurement.
This product conforms with essential health and safety requirements as set out in European Directives.
This product is CE marked as a Category 3 item for complex design.
40+ UPF rated fabric to block 98% of UV rays.
A mobile phone pocket is included in this garment.
This garment features 8 pockets.
This product has incorporated knee pad pockets that have been developed to carry Portwest's range of ergonomically designed knee pads.
An optional test for safety helmets, it indicates the resistance to molten metals and hot solids projection.
This garment has a radio loop for easy attachment of a radio.
The largest size this product goes up to is 4XL.
Wash at a Maximum Temperature of 40°C using a gentle wash cycle
Do not bleach this item
This item must not be tumbled dried
This item must be line dried
This item can be ironed on a medium temperature setting of up to 150°C
Do not dry clean this item
This item can only be washed a maximum of 50 times
EU Declaration of Conformity
