- 13 Gauge Orange Liner.
- 45% UHMW PE + 30% nitrile + 25% rubber
- 100% Foam Nitrile Coating
- 100% TPR Back of hand protection.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications.
- EN 388:2016+A1:2018
- Level 3 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 3 - Puncture Resistance
- Level B - TDM Cut Resistance (ISO 13997)
- Level P - Impact Protection
- 13 Gauge Orange Liner.
- 45% UHMW PE + 30% nitrile + 25% rubber
- 100% Foam Nitrile Coating
- 100% TPR Back of hand protection.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications.
- EN 388:2016+A1:2018
- Level 3 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 3 - Puncture Resistance
- Level B - TDM Cut Resistance (ISO 13997)
- Level P - Impact Protection
- 13 Gauge Orange Liner.
- 45% UHMW PE + 30% nitrile + 25% rubber
- 100% Foam Nitrile Coating
- 100% TPR Back of hand protection.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications.
- EN 388:2016+A1:2018
- Level 3 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 3 - Puncture Resistance
- Level B - TDM Cut Resistance (ISO 13997)
- Level P - Impact Protection
- 13 Gauge Orange Liner.
- 45% UHMW PE + 30% nitrile + 25% rubber
- 100% Foam Nitrile Coating
- 100% TPR Back of hand protection.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications.
- EN 388:2016+A1:2018
- Level 3 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 3 - Puncture Resistance
- Level B - TDM Cut Resistance (ISO 13997)
- Level P - Impact Protection
- 13 Gauge Orange Liner.
- 45% UHMW PE + 30% nitrile + 25% rubber
- 100% Foam Nitrile Coating
- 100% TPR Back of hand protection.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications.
- EN 388:2016+A1:2018
- Level 3 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 3 - Puncture Resistance
- Level B - TDM Cut Resistance (ISO 13997)
- Level P - Impact Protection
Please see our PPE disclaimer at the bottom of the page.
Data Sheet
