- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
- HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
- 100% Nitrile rubber coating.
- Ventilated back.
- Lightweight for maximum dexterity and comfort with sensitivity.
- Suitable for general assembly handling and engineering applications
- EN 388:2016+A1:2018
- Level 4 - Abrasion Resistance
- Level X - Cut resistance (Coupe Test)
- Level 4 - Tear Resistance
- Level 2 - Puncture Resistance
- Level C - TDM Cut Resistance (ISO 13997)
Please see our PPE disclaimer at the bottom of the page.