Optime I is very versatile protection, characterised by its lightness. Despite being so lightweight, it is the best imaginable protection.
We have combined a low profile with generous inside depth. This makes it easy to team with other equipment and means that the ear rests comfortably.
Optime I is the natural choice when you need to use all-round protection for both short and long spells.
The wide, comfortable sealing rings are filled with a unique combination of fluid and foam, which gives optimum sealing and low contact pressure, ensuring the best possible comfort even during long periods of use.
It is first-rate for use in environments with moderate industrial noise, such as workshops, sheet-metal shops and printing works, but can also be used to good effect outdoors, for instance when mowing the lawn or in connection with hobby and leisure activities.
Optime I is very versatile protection, characterised by its lightness. Despite being so lightweight, it is the best imaginable protection.
We have combined a low profile with generous inside depth. This makes it easy to team with other equipment and means that the ear rests comfortably.
Optime I is the natural choice when you need to use all-round protection for both short and long spells.
The wide, comfortable sealing rings are filled with a unique combination of fluid and foam, which gives optimum sealing and low contact pressure, ensuring the best possible comfort even during long periods of use.
It is first-rate for use in environments with moderate industrial noise, such as workshops, sheet-metal shops and printing works, but can also be used to good effect outdoors, for instance when mowing the lawn or in connection with hobby and leisure activities.
Optime III is a super-muff, and has been developed for use in extremely noisy environments.
The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.
An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.
The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.
Effective protection and best comfort are the hallmarks of Optime III.SNR = 35dB, H = 40dB, M = 32dB, L = 23dB
Optime III is a super-muff, and has been developed for use in extremely noisy environments.
The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.
An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.
The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.
Effective protection and best comfort are the hallmarks of Optime III.SNR = 35dB, H = 40dB, M = 32dB, L = 23dB
Optime I is very versatile protection, characterised by its lightness. Despite being so lightweight, it is the best imaginable protection.
We have combined a low profile with generous inside depth. This makes it easy to team with other equipment and means that the ear rests comfortably.
Optime I is the natural choice when you need to use all-round protection for both short and long spells.
The wide, comfortable sealing rings are filled with a unique combination of fluid and foam, which gives optimum sealing and low contact pressure, ensuring the best possible comfort even during long periods of use.
It is first-rate for use in environments with moderate industrial noise, such as workshops, sheet-metal shops and printing works, but can also be used to good effect outdoors, for instance when mowing the lawn or in connection with hobby and leisure activities.
Optime I is very versatile protection, characterised by its lightness. Despite being so lightweight, it is the best imaginable protection.
We have combined a low profile with generous inside depth. This makes it easy to team with other equipment and means that the ear rests comfortably.
Optime I is the natural choice when you need to use all-round protection for both short and long spells.
The wide, comfortable sealing rings are filled with a unique combination of fluid and foam, which gives optimum sealing and low contact pressure, ensuring the best possible comfort even during long periods of use.
It is first-rate for use in environments with moderate industrial noise, such as workshops, sheet-metal shops and printing works, but can also be used to good effect outdoors, for instance when mowing the lawn or in connection with hobby and leisure activities.
The wire headband offers consistent pressure over prolonged wearing periods.
Earcup pivot points tilt for optimum comfort and efficiency.
Noise Reduction Rating (NRR)b 27 dB. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
The wire headband offers consistent pressure over prolonged wearing periods.
Earcup pivot points tilt for optimum comfort and efficiency.
Noise Reduction Rating (NRR)b 27 dB. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Optime III is a super-muff, and has been developed for use in extremely noisy environments.
The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.
An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.
The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.
Effective protection and best comfort are the hallmarks of Optime III.
Optime III is a super-muff, and has been developed for use in extremely noisy environments.
The protection is based on a technology with a double casing that minimises resonance in the holder casing. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals.
An acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling.
The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.
Effective protection and best comfort are the hallmarks of Optime III.
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particulates, organic and inorganic gases, and vapours.
Protects against gases and vapours with a boiling point above 65°C
Protects against inorganic gases and vapours, and acid gases and vapours
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)Enzymes
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particulates, organic and inorganic gases, and vapours.
Protects against gases and vapours with a boiling point above 65°C
Protects against inorganic gases and vapours, and acid gases and vapours
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)Enzymes
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against organic and inorganic gases and vapours, as well as acid gases and vapours
Protects against mercury, ammonia, and organic ammonia derivatives
Protects against many kinds of particles, micro-organisms, and enzymes
A2 classification when used in negative pressure mode
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against organic and inorganic gases and vapours, as well as acid gases and vapours
Protects against mercury, ammonia, and organic ammonia derivatives
Protects against many kinds of particles, micro-organisms, and enzymes
A2 classification when used in negative pressure mode
Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions.
FT-30 uses a test solution of denatonium benzoate to produce a very bitter tasting spray
Spare hoods, nebulisers and solutions are also available
Spare hoods, nebulisers and solutions are available for the fit test kits.
Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions.
FT-30 uses a test solution of denatonium benzoate to produce a very bitter tasting spray
Spare hoods, nebulisers and solutions are also available
Spare hoods, nebulisers and solutions are available for the fit test kits.
High Performance Filter Material: 3M™ Advanced Electret filter material helps wearers to breathe easily through the respirator for more comfortable protection
Unique 3-panel design: Accommodates greater facial movement during speech
Embossed top panel: Reduces fogging of eyewear
Sculpted nose panel: Improves compatibility with eyewear
Innovative chin tab: For ease of fitting and adjustment of the respirator on the face
High Performance Filter Material: 3M™ Advanced Electret filter material helps wearers to breathe easily through the respirator for more comfortable protection
Unique 3-panel design: Accommodates greater facial movement during speech
Embossed top panel: Reduces fogging of eyewear
Sculpted nose panel: Improves compatibility with eyewear
Innovative chin tab: For ease of fitting and adjustment of the respirator on the face
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particulates and organic gases and vapours
Protects against organic gases and vapours with a boiling point above 65°C
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)Enzymes
A2 classification when used in negative pressure mode
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particulates and organic gases and vapours
Protects against organic gases and vapours with a boiling point above 65°C
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)Enzymes
A2 classification when used in negative pressure mode
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particles such as dust, mists, aerosols, smoke, mould, and bacteria
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)EnzymesEN 143:2000+A1:2006
Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode, as well as 3M™ Powered Air Respirator System PF-600 Series
Protects against particles such as dust, mists, aerosols, smoke, mould, and bacteria
Protects against a range of particulates:Solid and liquid particlesToxic and radioactive particlesMicro-organisms (e.g., bacteria and viruses)EnzymesEN 143:2000+A1:2006
Extremely slim and light-weight cups help to improve compatibility when used with other Personal Protective Equipment.
New specially formulated damping pads and innovative foam contained in the sealing ring provide excellent acoustic protection, particularly against sounds dominated by low frequencies.
Simple colour coding: bright green, indicating high attenuation combined with an extremely slim, lightweight designAttenuation: Helmet Attachment: SNR=32dB, H=36dB, M=30dB, L=21dB
Extremely slim and light-weight cups help to improve compatibility when used with other Personal Protective Equipment.
New specially formulated damping pads and innovative foam contained in the sealing ring provide excellent acoustic protection, particularly against sounds dominated by low frequencies.
Simple colour coding: bright green, indicating high attenuation combined with an extremely slim, lightweight designAttenuation: Helmet Attachment: SNR=32dB, H=36dB, M=30dB, L=21dB
The wire headband offers consistent pressure over prolonged wearing periods.
Earcup pivot points tilt for optimum comfort and efficiency.
Noise Reduction Rating (NRR)b 24 dB. CSA Class A. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
The wire headband offers consistent pressure over prolonged wearing periods.
Earcup pivot points tilt for optimum comfort and efficiency.
Noise Reduction Rating (NRR)b 24 dB. CSA Class A. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Robust shell and cup design conforms well to most face shapes and sizes and maintains its shape well during use.
3M Cool Flow valve reduces heat build up to offer comfortable protection, particularly in hot and humid conditions.
Soft inner face-seal ring provides secure face fit and increases wearer comfort.
Reliable, effective protection against fine particulates.
Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap design.- Comfortable, light weight off-the-face design.
Robust shell and cup design conforms well to most face shapes and sizes and maintains its shape well during use.
3M Cool Flow valve reduces heat build up to offer comfortable protection, particularly in hot and humid conditions.
Soft inner face-seal ring provides secure face fit and increases wearer comfort.
Reliable, effective protection against fine particulates.
Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap design.- Comfortable, light weight off-the-face design.
