A new test to measure impact protection was added to the EN388 standard. The method for testing is:
The Abrasion Test is designed to give an indication of the durability of the gloves. The performance levels are still the same but the sandpaper used to perform the test has been changed from 100 grit to a finer 180 grit material.
| Test | Level 1 | Level 2 | Level 3 | Level 4 |
| Abrasion Resistance (number of cycles) | 100 | 500 | 2,000 | 8,000 |
The method for testing the cut resistance of gloves has been typically carried out using a circular blade which moves back and forth across the surface of the gloves. This test is commonly referred to as the Coup Test. The revisions to the Coup Test are:
| Test | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
| Circular blade cut resistance (number of cycles) | 1.2 | 2.5 | 5 | 10 | 20 |
The Straight Blade test can be used in lieu of the Coup Test. It should also be used if the Coup Test reaches 60 cycles or if the cutting factor is greater than 3.
| TDM Test Method: EN ISO 13997 | Level A | Level B | Level C | Level D | Level E | Level F |
| Straight blade cut resistance (N) | 2 | 5 | 10 | 15 | 22 | 30 |
This European standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing.
The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges.
The requirements may not be sufficient in oxygen enriched flammable atmospheres.
This European Standard is not applicable for specifying protection against main voltages.
Test method for measurement of surface resistivity. Surface resistance measures the conductivity between two points on the surface of a fabric. The lower the resistance the higher the conductivity, resulting in charge going to earth.
Test method for measurement of the electrical resistance through a material (vertical resistance). This is the level of conductivity when measured through the depth of a fabric.
Test methods for measurement of charge decay. Charge decay measures how long it takes for an electric current to dissipate. The quicker it dissipates the higher the anti-static properties of the garment.
Please note the EN 1149-4 Garment Test is under development.
EN 1149-5 specifies the performance and design requirements to avoid static discharge for all electrostatic dissipative protective clothing as part of an entire earthed system, shoes, clothing & floor. The material meets the requirements.
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
The Portwest Vending Antistatic PU Palm Glove - Grey is a masterpiece of design and functionality, tailor-made for the precision-focused professional. Packed specifically for vending machines, this glove boasts a construction that merges 13g Nylon with a Carbon Fibre shell, ensuring a robust defence against static electricity. The PU palm coating not only augments its durability but also ensures phenomenal dexterity. It's a glove of choice for electronics assembly, testing, and other precision-based operations.
Key Features:
This glove seamlessly combines protection and precision, setting a new standard in the industry.
Compliance Standards:
Please see our PPE disclaimer at the bottom of the page.
Specifications are subject to change - See Terms & Conditions for more info
Portwest has been independently rated by Ecovadis for its environmental, social, and ethical performance and achieved a silver rating, meaning they are in the top 25% of globally rated companies.
The pillars taken into consideration include the environment, labour practices and human rights, ethics, and sustainable procurement.
This product conforms with essential health and safety requirements as set out in European Directives.
This product has been individually packed for vending machines.
EU Declaration of Conformity
