EN 149:2001- A1:2009 is the European Standard that covers the technical specifications for respiratory protective devices - filtering half masks to protect against particles.
There are 3 classes of masks as defined by the standard:
FFP1 = Lowest class of protection
FFP2 = Higher class of protection
FFP3 = Highest level of protection
This test measures the probability of the respiratory mask to protect the wearer against potential hazards.
A test subject wearing the particle mask walks in an enclosed test room, with a constant concentration of sodium chloride aerosol. While the subject breathes, the air inside the mask is sampled and analysed to determine which % of sodium chloride could pass through the mask.
In the table to the left: The lower the percentage the higher the protection
The goal of this test is to measure the filtering power of the masks.
This test is carried out by exposing a dummy head with a mask to 120mg of 2 test aerosols (Sodium chloride & Paraffin oil). The standard defines the maximum admitted penetration % of the 2 aerosols, for FFP1/FFP2 and FFP3 masks.
In the table to the left: The higher the penetration levels the lower the protection
This test assesses the ability of the filtering mask to provide protection while allowing the wearer to breathe easily.
In the table to the left: The permitted resistance is lower for FFP1 because it's a lighter mask and it's higher for FFP2 and FFP3 as they are thicker.
Experience ultimate comfort and protection with our metal-free FFP2 moulded valved respirator. With low breathing resistance, and soft nose foam, it's ergonomically designed to fit most face shapes. The drop-down head strap design allows easy removal, while the high-performing exhalation valve efficiently reduces heat and moisture inside the mask. Dolomite clogging tested for maximised breathing comfort, it's the perfect choice for your respiratory needs.
Please see our PPE disclaimer at the bottom of the page.
Specifications are subject to change - See Terms & Conditions for more info
Portwest has been independently rated by Ecovadis for its environmental, social, and ethical performance and achieved a silver rating, meaning they are in the top 25% of globally rated companies.
The pillars taken into consideration include the environment, labour practices and human rights, ethics, and sustainable procurement.
This product conforms with essential health and safety requirements as set out in European Directives.
This product is CE marked as a Category 3 item for complex design.
This product is 100% metal free.
This product is a new addition to the range of Portwest products.
EU Declaration of Conformity