This concentrate can be mixed with tap water at a ratio of 1:100 meaning that this will make 500 Litres of disinfectant that can either be used with your mops etc or put into spray bottles, however please note that once mixed, the liquid only has a shelf life of 8 hours so any unused liquid should be disposed of at the end of each day.
Bacoban is a long lasting disinfectant that using a process called "elusion" to ensure that surfaces continue to be disinfected for up to 10 days
This high quality medical grade disinfectant is especially useful in areas demanding effective and long-lasting protection and historically has been used in the healthcare sector as well as care homes to clean medical fittings, equipment and other surfaces
Bacoban is alcohol free and is a water-based surface disinfectant containing a polycondensate, a quaternary ammonium compound and sodium pyrithione. Bacoban is free from aldehydes and phenol.
For the disinfection of "medical" areas in accordance with Directive 93/42/EEC (Medical Devices) and all types of surfaces in hospitals, doctors practices, rehabilitation centres and retirement homes. Especially useful in areas demanding effective and long-lasting hygiene.
Particularly suitable for areas where unpleasant odours caused by micro-organisms form, such as toilets and sanitary facilities. Bacoban WB may be used in critical and sensitive areas of the pharmaceutical and cosmetic industries.
Bacoban is effective against: bacteria, fungi, hepatitis B and C viruses, HIV, influenza virus including HSN I, rotaviruses and adenoviruses as well as coronavirus.
Composition of product
100 g solution contains: benzalkonium chloride 26 g, sodium pyrithione 2.5 g, polycondensates, perfume substances, purified water.
Bacoban offers proven, long-lasting antimicrobial and anti-viral performance; however, it is important to stress that continued and appropropriate disinfection procedures should be maintained in all instances.
Labelled in accordance with EU Directive.
(applies to concentrate only; hazard symbols are not required for the readyto-use solution prepared according to the mixing table)
R34 Causes burns
R 50 Very toxic to aquatic organisms
S36/37/39 Wear suitable protective clothing
S26 In case of contact with eyes, rinse immediately with water and seek medical advice
S45 In case of accident or if you feel unwell, seek medical advice immediately
S61 Avoid release to the environment. Refer to special instructions/ material safety data sheet
Water hazard class: WHC 1
Notes for use
Prepare the required strength of ready-to-use solution. Commercial metering aids may be used to measure out the concentrate. To ensure high disinfectant performance, make sure that the whole area being treated is treated. After use, rinse and wash out cleanings aids well with water. Do not mix with other cleaners or additives. When used in excessive quantities or on transparent surfaces, a visible coating may develop after drying. This can be easily removed with commercial acidic or alkaline cleaners.
May be used on all surfaces. If unsure about the resistance of a particular surface, we recommend testing the product first on an inconspicuous area. Always store in closed container. Keep cool and dry. Container may not be recycled until completely empty. Do not use after the expiry date. Dispose of properly in accordance with local and official regulations.
Health and safety legislation requires that the appropriate protective clothing be worn when handling hazardous substances. Upon contact with the skin, rinse immediately with plenty of water: Do not swallow Avoid contact with the eyes. In case of contact with the eyes or mucous membranes, rinse thoroughly with water and seek medical advice.